Laboratory scraper thin film evaporatorCharacteristic
1.The heating time of the material in the scraper is short, and the evaporation effect is good for the materials which are easily oxidized in the air.
2.The feed quantity and discharge quantity can be accurately measured, so as to facilitate scientific calculation of purification concentration and product yield.
3.The scraper film evaporator can achieve high vacuum, and the effect of heat sensitive material is obvious.
4.The scraper film evaporator has good matching effect and can be connected to the distillation column, and can also be matched with other devices.
5.Different scraping systems can be selected according to the material state, and suitable for sticky and less solid materials.
6.High purity and good yield can be obtained.
7.We have been sticking to it"Pre factory assembly commissioning-Overall delivery-Zero installation on the spot"The principle is to save the huge cost and valuable time of on-site installation for customers.
8.Our leading industry design and manufacturing level, our cantilever rotor mature reliable lightweight, strong structure with a long life.
9.We insist"Professional welding mold&Large numerical control machine tool"To ensure that the concentricity also ensures the super long life of the rotor main shaft dynamic seal.
10.The maintenance is simple, the area is small, and the light weight is moved.
Laboratory scraper thin film evaporatorMain parameter table
|
Model |
ombm - 5 |
|
Evaporator material |
dd - 17High borosilicate glass |
|
Use of temperature |
Room temperatureTwo hundred℃ |
|
Internal diameter of evaporator (unit:mm） |
Eighty |
|
Evaporator area (unit:m2） |
Zero Point Zero Five |
|
Processing quantity(Company:ml / h.） |
500~1500 |
|
vacuum degree (unit:Pa） |
Ten～Five thousand(depends on the properties of the material and the choice of the vacuum system). |
|
Space space (unit:mm） |
long*wide*high=1100*500*1700 |
|
Model |
ombm - 10 |
|
Evaporator material |
dd - 17High borosilicate glass |
|
Use of temperature |
Room temperatureTwo hundred℃ |
|
Internal diameter of evaporator (unit:mm） |
One hundred |
|
Evaporator area (unit:m2） |
Zero point one |
|
Amount of treatment (unit:ml / h.） |
1000~3000 |
|
vacuum degree (unit:Pa） |
Ten～Five thousand(depends on the properties of the material and the choice of the vacuum system). |
|
Space space (unit:mm） |
long*wide*high=1100*500*1700 |
|
Model |
ombml - 5 |
|
Evaporator material |
s316lStainless steel |
|
Use of temperature |
Room temperatureThree hundred℃ |
|
Internal diameter of evaporator (unit:mm） |
Eighty |
|
Evaporator area (unit:m2） |
Zero Point Zero Five |
|
Processing quantity(Company:ml / h.） |
Two thousand～Four thousand |
|
vacuum degree (unit:Pa） |
Ten～Five thousand(depends on the properties of the material and the choice of the vacuum system). |
|
Space space (unit:mm） |
long*wide*high=1100*500*1700 |
Tel: 400-052-6177
Mobile: 15821189653
E-mail: shomsy@126.com
Website: http: //m.yitijia.com
Address: No. 298, Zhanfa Road, Fengxian District, Shanghai